6.0L POWERSTROKE OIL COOLER FLUSH KIT w/ AIRPORT (with aluminum, anodize adapter)

6.0L Powerstroke Oil Cooler Flush Kit w/ AIRPORT
- with BLUE anodized Flush Adapter -

(fits 2003 - 2010)
(also International VT365 / VT275)

THIS KIT COMES WITH "T" PORT TO CONNECT AIR HOSE TO OIL COOLER FLUSH KIT

Many 6.0L Powerstroke oil cooler replacements are completely unnecessary. Our easy-to-use flush tool kit can save you a substantial amount of time and money by allowing the existing cooler to be back-flushed on the vehicle as an alternative to costly and labor intensive part replacement.

Over time, the tiny cooling passages in the oil cooler become restricted due to leftover casting sand in the engine block and poor cooling system maintenance. This leads to high engine oil temperature, EGR cooler failure, and premature oil breakdown which, in turn, causes early-stage failures in the HEUI fuel injection system and even the engine itself. The traditional solution is oil cooler replacement. With our kit, the oil cooler can be back-flushed in less than an hour. By directing water flow in the opposite direction of normal travel, contaminants are dislodged and, in most cases, the cooler is returned to like-new effectiveness.

It is advisable to regularly monitor the Delta T (difference between oil temperature and coolant temperature) while operating the engine under load. If the temperature difference exceeds specification we recommend performing an oil cooler flush. Careful attention to this detail can prevent thousands of dollars of engine and fuel system damage. In the case of a cooling system that has experienced extreme neglect, even a new cooler can become restricted by contaminants quite quickly. Rather than repeatedly replacing the cooler, our kit allows the owner, or technician, to quickly restore the cooler to it's former effectiveness.

When compared to other alternatives, our kit has several unique advantages:

- Removal of the factory cooling manifold (which routes coolant from the oil cooler into the EGR cooler) is not required.
When disturbed, the quick-connect hose between the oil cooler and the EGR cooler will often begin leaking, resulting in a come-back. Our tool does not require tampering with this connection, averting much frustration.

- Equally effective on trucks equipped with the factory EGR cooler, or on those previously equipped with an EGR delete kit for off-road use.

- Can additionally be used to re-route coolant flow on EGR delete equipped trucks for better coolant flow through the oil cooler and lower Delta T.

- Blocks flow into the EGR cooler while the flush adapter is in use so that 100% of the water force is directed through the cooler for maximum cleaning effectiveness.

- Significantly lower cost than other alternatives

- Can be re-used over and over again - the vehicle is not altered, and there is no need for any part of the tool to remain on the vehicle

Kit Includes: (1) Flush adapter, required brass fittings, hose

For complete usage instructions, view one of the pictures.

We also have listed
- 6.0L IPR Air Test Tool

- 6.0L Cylinder Head Repair Kit

- HFCM Monster Drain Plug

- Heavy Duty Ball Tube Socket

- 5R110W Transmission Saver Plug

- 6.0L Front Crank Wear Sleeve Installer

- 6.0L Fuel Filter / Oil Filter Flip Socket

- 6.0L Adjustable Fuel Pressure Regulator

- Much more!

We are the manufacturer (no middle man)

PROUDLY MADE IN THE USA !

We do not ship on weekends or various holidays.