HOTOP Stud Installation Tool - 5/16" SI-01
Part Number: DS196039
Prop 65 Warning
Prop 65 Warning
cancer & reproductive harm
Price Match
Call for more info on price match
does not include 3rd party ads
Description
Stud Installation Tool - 5/16"
Designed to set Twin Cam and Evolution exhaust studs, Shovelhead rocker box studs, 4-speed transmission end studs, Bendix & Keihin carb flange studs and most other 5/16" studs, Made in the U.S.A.
View AllClose
Related Products
Related Products
On Sale
WOODY'S Stud Installer Tool STUD-INSTALL
WOODY'S
MSRP:
$41.98
Now:
$37.78
Was:
$41.98
WOODY'S Stud Installer Tool STUD-INSTALLUse this tool for installing and removing push-through studs, Comes with an extra hex bit
38200007
HOTOP Neck Bearing Tool NB 095
HOTOP
$43.95
Neck Bearing Tool
Slips under the tapered roller bearing on the lower triple tree to allow safe and easy removal, Used with any standard "T" puller and two pieces of 5/16"-18 threaded rod, Made in...
DS196015
STUD BOY Pro Backer Tool Installer 2521-00
STUD BOY
$32.95
STUD BOY Pro Backer Tool Installer 2521-00Safely applies pressure to the backer and keeps it properly oriented for optimum results, Tool is designed to hold the single Pro Series backer while...
38200016
On Sale
WOODY'S Indexing Tool - 5/16" SPI-TOOL-5
WOODY'S
MSRP:
$27.98
Now:
$25.18
Was:
$27.98
Use on installed square support plates to ensure their edges run parallel to the track's edge, For 5/16" Square Digger support plates, Fits on a standard 3/8" drive ratchet, Real time-saver
SPITOOL5
On Sale
HOTOP Breather Gear Air Ramp PBGR-20
HOTOP
MSRP:
$44.95
Now:
$27.00
Was:
$44.95
HOTOP Breather Gear Air Ramp PBGR-20Increases cfm flow by approximately 80%, Helps remove more air and oil from the crankcase, Made in the U.S.A., Requires the removal of the screen on S&S...
DS194254