S&S CYCLE Easy Start Cam Kit - Twin Cam 330-0445

Cold starts on high-compression Twin Cam engines can drain your battery and wear out your starter prematurely—especially on 103-cubic-inch mills pushing double-digit compression ratios. The S&S Cycle Easy Start Cam Kit solves this problem by temporarily reducing crank compression during startup, allowing your stock starter to turn the engine over effortlessly. Once ignition occurs and RPM rises, the compression release lobe retracts centrifugally, restoring full compression and normal performance with zero power loss.

This cam has been tested for 10,000 consecutive starts without running down your battery. It's the difference between a reliable cold-weather start and a dead battery on race day.

• Fits 88/95/96/103 cubic-inch engines
• Compression ratios below 10:1
• Stock starter compatible
• Centrifugal compression release design
• Full power at operating RPM
• Tested 10,000 starts minimum
• Chain-drive includes installation kit
• Gear-drive includes 4-gear set
• MPN: 330-0445
• Made in U.S.A.
• Not compatible with OEM compression releases
• Verify coil bind and valve clearances
• Gear-drive may increase valve train noise
• Bolt-on installation