BluePrint SBF EFI 302 Crate Engine 361 HP - 334 Lbs Torque BP302CTFK

The BluePrint SBF EFI 302 delivers 361 hp and 334 lb-ft of torque from a completely assembled, dyno-tested crate engine—eliminating months of machine work and tuning guesswork. With integrated EFI, a hydraulic roller cam, and aluminum heads, this engine transitions seamlessly into street cars, hot rods, and restorations while maintaining the reliability and efficiency you need for daily driving. Everything arrives ready to bolt in: oil pan, intake manifold, distributor, timing cover, and accessory drive are all included.

• Output: 361 HP / 334 lb-ft torque
• Block: BluePrint cast iron, 4.000" bore
• Stroke: 3.000"
• Compression: 9.4:1
• Rotating Assembly: Cast steel crank, hypereutectic pistons
• Cylinder Heads: BluePrint aluminum, 60cc chambers
• Valves: 2.02" intake / 1.60" exhaust
• Runners: 190cc intake / 60cc exhaust
• Cam Type: Hydraulic roller
• Lift: .533" intake / .544" exhaust
• Duration: 215° intake / 220° exhaust @ .050"
• Lobe Separation: 114 degrees
• Ignition Timing: 10-16° initial, 32-34° total
• Fuel System: Integrated EFI
• Fuel Octane: 87 octane capable
• Vacuum Production: Up to 16 inches (power brake compatible)
• Installation: Bolt-in ready
• Included: Oil pan, intake, distributor, harmonic balancer, valve covers, timing cover, accessory drive
• Main Bearings: 4-bolt
• Rear Seal: 1-piece
• Balance: 50oz external
• Warranty: 30-month / 50,000-mile
• Testing: Dyno results included
• Water Pump: Requires standard rotation, V-belt driven