Closeouts

The ultimate 1-1/4" diameter handlebar, designed for maximum comfort, 1" diameter in clamping area, Slotted and notched for Throttle-By-Wire options, Standard bars have 3-1/2" on-center knurling to prevent movement, Made in the U.S.A., Not for use with...

Diamond-knurled and machined for internal wiring, Accept stock controls and handlebar clamp, Designed specifically for electronic throttle control applications, Accept H-D OEM heated grips, Made in the U.S.A.

Designed specifically as a direct bolt-on upgrade for 15-19 Road Glide models, Bars include black control clamps to replace the "oversize" OEM clamps, Do not need to remove stock pin in the OEM mount clamps; bars still have more than 35° of adjustment,...

DRAG SPECIALTIES Marker Lights - White/Amber - Chrome

DRAG SPECIALTIES Brake Arm - Gloss Black

Feature double-lip seals and oversize bearings for more capacity and more surface-area contact on the axle, Housings are ready to use direct from the factory, Increase axle life and bearing capacity, Can be used with stock axle

PC programmable ignition maps, +/-20° timing range, Individual cylinder timing, Gear position timing, Timing can be adjusted based on boost or temperature inputs, Built-in launch limiter, Pit lane limiter

Plug-in replacement module with four programmable advance curves that provide improved torque and 800% more spark energy for easier starts, Four programmable timing curves, 3D advance curves on TPS-equipped bikes, One programmable rev limit per ignition...

Plug-in replacement module with four programmable advance curves that provide improved torque and 800% more spark energy for easier starts, Four programmable timing curves, 3D advance curves on TPS-equipped bikes, One programmable rev limit per ignition...

Designed for industrial or other applications where a lower-than-stock speed limiter is required, Allows full power to be used up to the programmed speed limit, Easy to install with no modifications to the factory harness, Uses factory connectors

Plug-in replacement module with four programmable advance curves that provide improved torque and 800% more spark energy for easier starts, Four programmable timing curves, 3D advance curves on TPS-equipped bikes, One programmable rev limit per ignition...

Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected, "Warm-up" fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on the reading), Can add...

Plugs into the vehicle's diagnostic port and seamlessly integrates AFR data from the included wideband O2 sensor(s) with the OEM databus, When used in conjunction with Power Vision CX, you can view and datalog wideband O2 data alongside custom channels...

Connects to the ignition coils through an intermediate harness connection or directly to the coil connectors; no cutting or splicing of wires is required, Allows user to advance or retard the ignition curve based on throttle position and rpm, and to tune...

Connects to the ignition coils through an intermediate harness connection or directly to the coil connectors; no cutting or splicing of wires is required, Allows user to advance or retard the ignition curve based on throttle position and rpm, and to tune...

Connect to the ignition coils through an intermediate harness connection or directly to the coil connectors; no cutting or splicing of wires is required, Allow user to advance or retard the ignition curve based on throttle position and rpm, and to tune...

Connect to the ignition coils through an intermediate harness connection or directly to the coil connectors; no cutting or splicing of wires is required, Allow user to advance or retard the ignition curve based on throttle position and rpm, and to tune...

Connect to the ignition coils through an intermediate harness connection or directly to the coil connectors; no cutting or splicing of wires is required, Allow user to advance or retard the ignition curve based on throttle position and rpm, and to tune...

Connect to the ignition coils through an intermediate harness connection or directly to the coil connectors; no cutting or splicing of wires is required, Allow user to advance or retard the ignition curve based on throttle position and rpm, and to tune...

Software is compatible with Power Commander, so you can download Power Commander maps to the unit, Plug-n-play fuel management device pre-programmed with make/model specific maps, Fully adjustable computer compatibility for ultimate tuning and...