Harley Mounts and Parts

TRASK Mikuni to CV Carburetors Adapter DM-1797Use to mount either an S&S E/G or Keihin CV style air cleaners to a Mikuni HSR 42/45 carb, Machined T-6061 billet aluminum construction, Made in the U.S.A.

MIKUNI Flange Adapter Black 48mm HS42/062-48KOriginal straight-through design, Includes clamp, Made in Japan

DRAG SPECIALTIES Bendix/Keihin Air Cleaner Brace XL-'85 70159Use with our Dragtron™ air cleaners to eliminate carb vibration, which can lead to air leaks, Chromed steel support braces fit models equipped with Bendix or Keihin carbs, Includes hardware and...

DRAG SPECIALTIES Air Cleaner Bracket XL '88-'06 120046-BC315Can be used in conjunction with most breather kits (where applicable), All gaskets and mounting hardware included, Breather kits/bolts sold separately, Mount to the cylinder heads

DRAG SPECIALTIES Air Cleaner Bracket Big Twin/Twin Cam '90-'17 120089-BC315Can be used in conjunction with most breather kits (where applicable), All gaskets and mounting hardware included, Breather kits/bolts sold separately, Mount to the cylinder heads

S&S CYCLE O-Ring Intake Clamp 55-78 mm 16-0230Clamps are 3/4" wide and constructed of .020" thick stainless steel and use a curved 10-24 threaded "T"-bolt with plated steel aircraft-style hex locknut, Made in the U.S.A.

S&S CYCLE Backplate Attachment Screw Each 5'16-24 x .360" 17-0346Replacement components, Made in the U.S.A.

S&S CYCLE Screw Breather 1/2" 17-0347Replacement components, Made in the U.S.A.

DRAG SPECIALTIES Air Cleaner Mount Bracket XL '07-'17 120133Can be used in conjunction with most breather kits (where applicable), All gaskets and mounting hardware included, Breather kits/bolts sold separately, Mount to the cylinder heads

LA CHOPPERS S&S Air Cleaner Adapter LA-2890-01Will also work for mounting other air cleaner kits designed to mount stock CV carburetors; not for use with Arlen Ness Big Sucker air cleaners, Constructed from 6061 T-6 billet aluminum, Made in the U.S.A.

S&S CYCLE Adjustable Carburetor Support Bracket 16-0471Mounts from the center-case bolt between cylinders to the lower flange mount of the manifold, Includes hex head bolt, washer and locknut, Adjusts from 5.25" to 6.375", Made in the U.S.A.

S&S CYCLE Manifold Super E/Evolution/Twin Cam 160-1718For mounting an S&S E and G series carburetor or flange mount carburetor on a 99-06 Twin Cam motor with S&S or stock cylinder heads, Will also fit a 84-99 80" Evolution that requires a manifold with a...

S&S CYCLE Band Intake Clamp 79-84 mm 16-0231Clamps are 3/4" wide and constructed of .020" thick stainless steel and use a curved 10-24 threaded "T"-bolt with plated steel aircraft-style hex locknut, Made in the U.S.A.

S&S CYCLE Manifold Conversion Evolution Big Twin 160-1658Includes an S&S Performance manifold, mounting flanges, two specially molded O-rings and two .350" spacers for spacing out the stock air cleaner or carb mount bracket, Eliminates cracking and...

S&S CYCLE Air Cleaner Super E/G Carburetor Hardware 17-0437Replacement components for Super E and Super G carburetors

S&S CYCLE Super E Carburetor Manifold '86-'03 XL 16-1620For S&S A/B/E, Tillitson, Bendix and Keihin butterfly carburetors, Made in the U.S.A.

S&S CYCLE Manifold Conversion '86-'03 XL 16-1650For S&S A/B/E, Tillitson, Bendix and Keihin butterfly carburetors, Made in the U.S.A.

S&S CYCLE CV Manifold Evolution/Twin Cam 160-1722Used to install a stock CV carburetor on S&S 3.625", 4" and 4.125" bore motors, Will also fit S&S Hot Setup and Super Stock™ head kits, Made in the U.S.A., Requires the use of S&S manifold O-rings and...

S&S CYCLE Manifold Super E/Evolution/Big Twin 160-1628Can be used to replace stock "compliance fitting" manifold on 84-89 and stock rigid-mount manifold from 90-99, Requires the use of S&S intake seals and flanges (sold separately), For use with stock 5...

S&S CYCLE CV Manifold Evolution/Big Twin 160-1736Used to install a stock CV carburetor on S&S 3.625", 4" and 4.125" bore motors, Will also fit S&S Hot Setup and Super Stock™ head kits, Made in the U.S.A., Requires the use of S&S manifold O-rings and...