Harley Cams and Parts

FEULING OIL PUMP CORP. Camshaft 518 Grind Evolution 1390Direct bolt-in replacement for EVO engines, Can be used with stock valve springs, pushrods and lifters, Will respond well with performance exhaust and air cleaner, Will also respond well with...

FEULING OIL PUMP CORP. Chain Drive Cam 630 Series 1003Carburetor and or throttle body work required along with a performance exhaust and intake system, Maintains low end performance with eye-blurring mid and top end power, High-performance valve springs,...

FEULING OIL PUMP CORP. Camshaft Installation Kit Chain Drive 2059Each kit includes cam plate roller bearings, Koyo Torrington® full roller inner needle bearings, 12-point ARP® camshaft and crankshaft bolts, ARP® fastener moly paste and Loctite® compound...

FEULING OIL PUMP CORP. Camshaft Installation Kit Chain Drive 2058Each kit includes cam plate roller bearings, Koyo Torrington® full roller inner needle bearings, 12-point ARP® camshaft and crankshaft bolts, ARP® fastener moly paste and Loctite® compound...

FEULING OIL PUMP CORP. Camshafts 505/515 XL 1370Produce a wide powerband in stock engines, Split lift camshaft produces a solid powerband with top fuel sound, Can be used with stock pushrods and valve springs, Fueling recommends new camshafts with new...

FEULING OIL PUMP CORP. Cam 594 Series Gear Drive 1304Fierce performing camshaft for an array of engine sizes, large displacement 103", 110" and 124" engines looking for a superior torque band with excellent horsepower gains in heavy bikes (2200-6250),...

ANDREWS Cam Set Dyna Twin Cam 216357Cams work well with fuel injection or carburetor models, Run best with low restriction exhausts (1700-5200 rpm), Works well with carbs or fuel injection, Bolt-in cam for more torque with stock compression, Can be used...

FEULING OIL PUMP CORP. Chain Pins Tensioner 8003Made from heat-treated chromoly steel, Ensure proper press fit when changing Twin Cam chain drive cam plates or replacing chain drive tensioners, Made in the U.S.A.

FEULING OIL PUMP CORP. Pressure Relief Kit 8002Increases pressure relief valve pop-off psi, Kit includes valve plunger, spring and roll pin, Spring alone provides proper spring rate to control pop-off pressure and oil flow in bypass port, Made in the U.S...

FEULING OIL PUMP CORP. Camshaft Installation Kit Chain Drive 2070Each kit includes cam plate roller bearings, Koyo Torrington® full roller inner needle bearings, 12-point ARP® camshaft and crankshaft bolts, ARP® fastener moly paste and Loctite® compound...

FEULING OIL PUMP CORP. Camshaft Installation Kit Gear Drive 2065Each kit includes cam plate roller bearings, Koyo Torrington® full roller inner needle bearings, 12-point ARP® camshaft and crankshaft bolts, ARP® fastener moly paste and Loctite® compound...

FEULING OIL PUMP CORP. Camshaft Installation Kit Gear Drive 2060Each kit includes cam plate roller bearings, Koyo Torrington® full roller inner needle bearings, 12-point ARP® camshaft and crankshaft bolts, ARP® fastener moly paste and Loctite® compound...

ANDREWS A2 Grind Cam 212263Cam bolts into 66-84 (except 80-81) Big Twin engines with no head work; on 80-81 engines the height of the stock H-D valve guides restricts spring travel (and cam lift) to .430" or less, Spring travel and clearance, plus...

ANDREWS A2 Grind Cam 212260Cam bolts into 66-84 (except 80-81) Big Twin engines with no head work; on 80-81 engines the height of the stock H-D valve guides restricts spring travel (and cam lift) to .430" or less, Spring travel and clearance, plus...

ANDREWS Cam Set Dyna Twin Cam 216355GCams work well with fuel injection or carburetor models, Run best with low restriction exhausts (1700-5200 rpm), Works well with carbs or fuel injection, Bolt-in cam for more torque with stock compression, Can be used...

ANDREWS Cam Set Dyna Twin Cam 216337GCams work well with fuel injection or carburetor models, Run best with low restriction exhausts (1700-5200 rpm), Works well with carbs or fuel injection, Bolt-in cam for more torque with stock compression, Can be used...

ANDREWS Cam Set Dyna Twin Cam 216326GCams work well with fuel injection or carburetor models, Run best with low restriction exhausts (1700-5200 rpm), Works well with carbs or fuel injection, Bolt-in cam for more torque with stock compression, Can be used...

ANDREWS Cam Set Dyna Big Twin 216321GCams work well with fuel injection or carburetor models, Run best with low restriction exhausts (1700-5200 rpm), Works well with carbs or fuel injection, Bolt-in cam for more torque with stock compression, Can be used...

ANDREWS Roller Conversion Sprocket 21601534 teeth with ignition trigger ring, Must use with 99-01 engines with stock ignition, 02-06 engines can use stock rear cam drive sprocket, Trigger ring required for 99-01 engines with rear cam drive sprockets to...

ANDREWS Conversion Camshaft 216855Allow you to upgrade your 99-06 Twin Cam (except 06 Dyna Glide) to the newer roller-style cam chains and replaces the spring tension cam chain adjusters with the later-style hydraulic adjusters for longer life, Cam...