Electrical System Tools

TECHNORESEARCH Centurion Super Pro TR3-001-004The industry's only complete professional diagnostic tool system designed for independent professional repair facilities, Communicates with all current Harley-Davidson and Buell models using the proprietary...

TECHNORESEARCH Tool O2 Sensor Installer TR200044Adds 18 mm x 1.5" threaded bungs, Complete bung kit includes 1 hydraulic insertion tool, 1 drill bit, 2 O2 sampler blocks, tubing, 25 rivnuts, 25 screws and, 25 copper washers, Remove heat shields, install...

TECHNORESEARCH Refill Kit O2 Installer TR200045Includes 25 each of bungs, plugs and copper washers

TECHNORESEARCH Centurtion Harley-Davidson Audio Diagnostic TR4-001-007Radio and speaker zoning and configuration system that doubles as a diagnostic tool, Programs after-market radio and speakers; can activate intercom, Bluetooth, navigation/compass, CB,...

NAMZ Tool U Barrel 5-Position Crimp NDC-990170Five-position crimp tool, For U-barrel or open barrel terminals

NAMZ Tool Crimp Mini U Barrel NJC-990120Designed for use with JAE, JST and Delphi terminals, Perfect for small 30 to 20-gauge terminals

NAMZ Terminal Removal Tool NDP-422Removes both pin and receptacles, Made in the U.S.A.

NAMZ Terminal Removal Tool Molex NMTRT-01Removes both pin and receptacles, Made in the U.S.A.

NAMZ Terminal Tool Female Mat-N-Lock Rigid NMLRT-01Removes both pin and receptacles, Made in the U.S.A.

NAMZ Terminal Tool Male Mate-N-Lock Slider NMLRT-02Removes both pin and receptacles, Made in the U.S.A.

DRAG SPECIALTIES Permanent Battery Lead O-01 O-01DPremium quick connector permanent battery leads, Weather-protected connection system and cable, Industry standard 2-pin SAE connector, Length 20"/50cm; eyelet diameter 1/4 and M6 weather-protected 15A...

DRAG SPECIALTIES Battery Cable Crimp Tool 99-1012Ideal tool for crimping terminals onto battery cables, Will crimp all standard-size terminals

CUSTOM DYNAMICS Light Tester 12-Volts Direct Connection CD-TL-12VDCTests for shorts, open and voltage

JIMS Tool Multimeter Probe Kit 737Assortment of color-coded, sharp probes for precise, back probing and non-damaging diagnostics when working with sealed connectors and wiring harnesses, Standard 4 mm banana plug connections work with most multimeter...

JIMS Tool Ignition Switch Alignment 944Align ignition switch housing as retaining screws are being torqued, Also used to position switch in the correct orientation for properly activating the fork lock, Proper alignment of the switch will extend the life...

JIMS Tool Thread Chaser 12Mmx1.25 1758Use to repair any I.D. thread that has been damaged, Will not cut oversize threads, Designed with three flutes and a generous lead-in pilot for the best feel when repairing threads, Made in the U.S.A.

JIMS Tool O2 Sensor 10-19FLHT 784Remove and install oxygen sensors on fuel-injected models, Socket tool will withstand up to 125 ft.-lbs. of torque, Made in the U.S.A.

JIMS Tool Ignition Switch Connector 03-13 942Safely removes ignition switch wiring connector, Slip the dog bone end of tool into the bottom side of connector until it is touching the back end of connector box, Then gently pull out the male wiring...

JIMS Tool Ignition Switch Alignment Tool 943Align ignition switch housing as retaining screws are being torqued, Also used to position switch in the correct orientation for properly activating the fork lock, Proper alignment of the switch will extend the...

DRAG SPECIALTIES Optimate 5 The Power Charger / Tester / Maintainer TM2316-step automatic battery saving charger, tester & maintainer, Delivers 4 Amps constant charge, 24/7 Safe long term battery care, POWER CHARGE gets you riding within hours!