Harley Suspension Tools

MOTION PRO Tool Bearing Steering Stem Harley-Davidson® 08-0558Removes and installs tapered roller bearing at base of steering stem, Fits within steering stops on lower triple clamp, Removal process requires cutting outer sheet metal cage from tapered...

MOTION PRO Fork Spring Compression Kit 41Mm 08-0301Designed to install fork caps on forks with a large amount of spring pre-load, Will work on most 39 mm and 41mm Harley-Davidson® fork applications, Made in the U.S.A.

MUELLER MOTORCYCLE AG Compressor Tool 130-0Suited for all Harley-Davidson® Softail models, Fast assembly of the lowering kit

LANG TOOLS Fork Oil Refill Kit 440Allows replacement of the oil in the fork through the drain plug without disassembling the fork and front end, Works great on fairing models with hard-to-reach fork tube nuts, For drain bolt size M8 x 1.25 mm

Allows more range of adjustment without raising the bike by utilizing a 3/8" ratchet drive, Works on any OE or Progressive Suspension Softail shock, Easier to use than the stock OEM tool

JIMS Tool 3rd Hand Axle Locker 970Prevents axle from moving while torquing down the axle nut after setting belt tension, Eliminates the need for a helper or trying to blindly hold the axle from the other side of the tire, Made in the U.S.A.

JIMS Tool Hollow Axle Plug 950Helps establish a center point during alignment, Lube the o-ring ends of these tools and insert in left and right ends of axle, Plug into left and right ends of axle, Made in the U.S.A.

JIMS Tool Fork Fluid Filler 740Ultimate tool for servicing fork oil on conventional forks that have a drain screw, Huge time saver by not having to remove fairing, handlebars and other parts, No need to remove fork caps, Not for use with cartridge or...

JIMS Tool Fork Stem Nut 977Normally to get access to the top stem nut requires the need to remove the radio package, This tool allows the ability to loosen, tighten and torque to spec the 1-1/2” stem nut without radio removal, Saves up to 45 minutes for...

JIMS Tool Fork Cap Install 49Mm 5821Used to install fork tube caps without removing the fork legs from the bike, Made in the U.S.A.

JIMS Socket Fork Castle Nut 17+ST 5831Socket adapts wrench to remove castle nuts and access shock cylinder, Made in USA

JIMS Tool Fork Cap Socket FLH 5827Harley-Davidson® recently updated the fork cap on touring bikes, and you now need a large Allen head socket for disassembly, Works on Touring models with 49 mm forks, Made in the U.S.A.

JIMS Tool Swing Arm Bearing Installer FLH 5822Both drive side and brake side bearings, which are at different depths, can be easily and accurately installed with this tool kit, JIMS® took it one step further and added a remover to press the spacer out of...

JIMS Compressor Front Fork 1776Tool compresses springs in cartridge-style forks when servicing or rebuilding, Can be mounted in vise for easy, hands-free servicing, Also includes FLT adapter for FLT forks to eliminate direct contact with spring coil and...

JIMS Holder Fork Tube and Leg 2251Holds fork legs and tubes for easy hands-free servicing or rebuilding, Mounts in vise to hold fork firmly during repair without causing damage to fork assembly, Use on smaller 28 mm or larger fork tubes with a maximum...

MOTION PRO Fork Tube Nut/Cap Socket 1/2" 08-0139O-ring insert to help protect the top of the cap from damaging polished surfaces, Thin socket measures only 9/32" deep by 5/8" tall, Fits most Big Twin and Sportster® models, Use for removal of 1-3/8" hex...

RACE TECH Fork Spring Compressor Adapter Harley-Davidson® TFSC A01Adapter is recommended for disassembly of Harley-Davidson® cartridge forks

DRAG SPECIALTIES Pump Air with/Gauge 0-30 3805-0082For rear shock and front fork adjustable air suspensions; also may be used for emergency tire repairs, Fitted with a precise adjust button 2-3 psi per push, Rotary flexible hose, die-cast gauge base and...

DRAG SPECIALTIES FXST Shock Adjuster Tool 77-6002Makes preload adjustments much easier

DRAG SPECIALTIES Pump Air with/Gauge 0-60 420027For rear shock and front fork adjustable air suspensions; also may be used for emergency tire repairs, Fitted with a precise adjust button 2-3 psi per push, Rotary flexible hose, die-cast gauge base and...