MWS

Mini Wedge Steering Tie Rod 3/8 Includes tube, 2 heims, 2 jam nuts. 

Butterfly Steering Wheel Butterfly Steering Wheel (Black Only) universal bolt pattern

Air Filter for Mini Wedge 2-7/16 Flange Most common air filter used on 212 mini wedges. This filter is angled and has a 2-7/16" flange. Fabric. 4" inch tall.  Fabric 3.5" x...

PMI Straight Spindle 10 Degree 10 Degree KPI 1/2" ID Bearings Installed Straight 5/8" shaft....short, for LH oval use only 1.5" Tall Barrel Fits OEM Slack brand karts, but is a great universal...

Aluminum Clevis Assembly 1/4-28 Thread Aluminum Clevis Assembly Includes Clevis Pin and Cotter Pin For Brake or Throttle Rods with 1/4-28 Thread Black Anodized Aluminum

Floor Mount Throttle Bracket Bolt In Floor Mount Throttle Bracket Clear Zinc Plated

1/4-28 Threaded Rod - 2 Foot straight threaded rod

Plastic Sprocket Guard 9" Plastic Sprocket Guard 9" OD

MaxTorque Stamped (11 Tooth) Clutch Gold Bushing Max-Torque Clone clutch, 11 Tooth

Pedal Grips 1/2 inch Pair 1/2" Aluminum Pedal Grips pair (Black)

Brake Pedal Uses 1/2" Pedal Grips

Throttle Pedal Uses 1/2" Pedal Grips

Snap Ring to hold the clutch driver to the clutch drum. Fits 12 tooth sprockets only. All other size sprockets, 13t and up, and 11t and below, have a specific snap ring to match sprocket and drum.

Axle snap ring (1 1/4")

High Quality MCP Brake Systems and Parts. The Industry Standard for Brake Components. Kit comes with hardware to mount rotor to hub. Hardware to attach caliper and master cylinder to frame is not...

1 1/4" Free Spin Axle Bearing Bearing is marked UC206-20K If OIL HOLE PLUG is present, it must be removed before installation.

Valve Stem (Short)

6" x 1/8" Mini Lite Disc Lite Weight (Standard with Kit)

MCP Brake Fluid 4 ounce

Throttle Pedal Zinc Plated w/ Built in Stop 4 Position Rod Mounting

Brake Pedal Zinc Plated w/ Built in Stop 4 Position Rod Mounting

5/8" Castle Nut for Spindle (2) 5/8" Spindle 'AN' Washer (2) 

Includes Support Kit Muffler and Clamp not included. .930" ID x 1.060" ID x 1.220" ID x 19.25" Long Thick Flange requires DHBKCLL Bolt Kit (Long) INCLUDED

5/8" Front Wheel Hub, Silver

1 1/4" Rear Wheel Hub, Silver

5/8" Hub Bearing Bearing is marked 99502H OD is 1.375" This bearing is not intended for use in Douglas DSM wheels.

Aluminum Fuel Tank (3qt) 3 3/4" Wide, 9" Deep, 7 3/4" Tall Petcock is on RIGHT side of tank

Aluminum Fuel Tank (2qt) 2 1/2" Wide, 9" Deep, 7 3/4" Tall Petcock is on RIGHT side of tank.

Mini Lite Master Cylinder   High Performance version with 3/4" Bore

MCP Master Cylinder Bolt. 5/16 x 24 x 2.25" with nut and cotter key.

MCP Mini Lite Brake Caliper Mounting Bolt. (5/16" x 4") Comes with bolt, nuts, washers, and cotter pin. Works with or without Rotor Guard (Wolfe Plate).

Mini wedge Brake Pad Mini Lite Brake Pad, Black. Standard Sold Individually.

Kit includes: (2) brass fittings, (1) ball end throttle cable, and (1) 4ft. cable housing

Throttle Cable 72" Barrel End Cable measures 72" and comes with barrel end

Throttle Cable, Ball End (72") Measures 72 inches. Has ball shaped end.

Mini Wedge Caliper Mini Lite Caliper Assy.

Regular Non Rolling Kart Stand Black Stand is great for use at home, at the shop and at the track. Round Horizontal top tubes and durable standard black powder coat finish.  When only the best...

Clone Engine Restrictor Plate (.425") Green Clone Engine Restrictor Plate, Green (.425")

Throttle Clevis (clevis only) Throttle rod & pedal clevis (clevis only).