Dirt Bike Cams and Parts

ANDREWS Cam Chain Drive Sprocket 288015Manufactured from 4340 steel, Cam drive sprockets replace the stock 34-tooth cam drive sprocket and include shims, Crankshaft cam drive is a 17-tooth sprocket that can be used with OEM cam drive sprocket, Made in...

ANDREWS Cam Set Twin Cam 288121Cams work well with fuel injection or carburetor models, Run best with low restriction exhausts (1700-5200 rpm), Works well with carbs or fuel injection, Bolt-in cam for more torque with stock compression, Can be used with...

ANDREWS Cam Set Twin Cam 288155Cams work well with fuel injection or carburetor models, Run best with low restriction exhausts (1700-5200 rpm), Works well with carbs or fuel injection, Bolt-in cam for more torque with stock compression, Can be used with...

ANDREWS Cam Set Twin Cam 288126Cams work well with fuel injection or carburetor models, Run best with low restriction exhausts (1700-5200 rpm), Works well with carbs or fuel injection, Bolt-in cam for more torque with stock compression, Can be used with...

ANDREWS Cam Set Twin Cam 288137Cams work well with fuel injection or carburetor models, Run best with low restriction exhausts (1700-5200 rpm), Works well with carbs or fuel injection, Bolt-in cam for more torque with stock compression, Can be used with...

ANDREWS Cam Set Twin Cam 288150Cams work well with fuel injection or carburetor models, Run best with low restriction exhausts (1700-5200 rpm), Works well with carbs or fuel injection, Bolt-in cam for more torque with stock compression, Can be used with...

BBR MOTORSPORTS High Performance Cam 411-YTR-1212Designed by BBR

BBR MOTORSPORTS Camshaft 411-KLX-1121Designed by BBR

BBR MOTORSPORTS High Performance Cam 411-KLX-1120Designed by BBR

BBR MOTORSPORTS High Performance Cam 411-HCF-1503Designed by BBR

ANDREWS EV13 Cam Evolution 291113These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float, Bolt-in cam for street or touring use with more mid-range and upper-end power than the stock 88 EV cams, Uses stock springs;...

ANDREWS Low-Compression Cam Big Twin 212150Designed with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output through the entire rpm range, Designed for hydraulics, but could be run with solids, Grind #1 is...

ANDREWS Low-Compression Cam Big Twin 212340Designed with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output through the entire rpm range, Designed for hydraulics, but could be run with solids, Grind #1 is...

ANDREWS Low-Compression Cam Big Twin 212350Designed with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output through the entire rpm range, Designed for hydraulics, but could be run with solids, Grind #1 is...

ANDREWS EV46 Cam Evolution 291146These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float, Made in the U.S.A.

ANDREWS AB Grind Cam Big Twin 212335These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float, Made in the U.S.A.

ANDREWS PB+ Grind Cam XL 214014"PB+" exhaust cams only (#s 1 and 4), Use with stock P intake cams for bolt-in power with stock 1000cc engines; stock springs are okay and no head work is required, Made in the U.S.A., 81-E84 cam gear kits (with generators)...

ANDREWS AB Grind Cam Big Twin 212320These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float, Made in the U.S.A.

FEULING OIL PUMP CORP. Cam Kit HP+?« M8 1443Include camshafts, lifters and a cam installation kit that includes the cam bearing, cam/crank hardware, Kit also includes gasket/O-ring kit that allows installation of Feuling Heavy-Duty HP+ .0165" wall...

FEULING OIL PUMP CORP. Cam Kit Race Series?« M8 1453Include camshafts, lifters and a cam installation kit that includes the cam bearing, cam/crank hardware, Kit also includes gasket/O-ring kit that allows installation of Feuling Heavy-Duty HP+ .0165"...