Dirt Bike Engine Tools

BIKESERVICE Thin Plug Socket 18MM BS9134Thin wall bi-hex sockets designed to access narrow spark plug holes, Built-in rubber insert to hold plug steadily.

LANG TOOLS Compression Tester TU310-PBMetal clip can be attached to the gauge, then the gauge can be clipped to the frame or handlebars, allowing hands-free testing, Includes 10 mm, 12 mm, 14 mm and 18 mm long reach adapters to test most engines, Dual...

LANG TOOLS Pliers Retaining Ring 1450Contains two Quick Switch interchangeable tip pliers, First set of pliers works on internal ring sizes of 1/4"-1" (7 mm-26 mm) and external rings 1/8"-1" (3 mm-26 mm), Other set works on internal sizes of 3/8"-2" (10...

LANG TOOLS Feeler Gauge 32 Blade Set 36AFor ignition and general purpose measuring, Made in the U.S.A.

MOTION PRO Bearing Retainer Tool XR Seal 08-0227Now don't use a chisel and a hammer to remove wheel seal/bearing retainers, Motion Pro® retainer tools make for easy removal and installation of the wheel seal/bearing retainers with no damage to the...

MOTION PRO Bearing Retainer Tool CR Seal 08-0228Now don't use a chisel and a hammer to remove wheel seal/bearing retainers, Motion Pro® retainer tools make for easy removal and installation of the wheel seal/bearing retainers with no damage to the...

MOTION PRO Leak Down Tester 08-0071Designed to check for air leaks in 2-stroke engines, Includes air pressure gauge, pump-up bulb and fittings and adapters in 35 mm, 41 mm, 43 mm, or 46 mm intake manifolds sizes, Expandable rubber exhaust port plugs fit...

MOTION PRO Snap Ring Pliers 08-0186Economical pliers easily work with both inside and outside opening snap rings or clips, Includes three extra sets of tips: one additional straight tip and two offset or angle tips

MOTION PRO Masterlink Pliers 08-0230Designed to simplify installation and removal of clip-type masterlinks, One tip is shorter and notched to be placed on the pin, which allows the longer end to push the clip

MOTION PRO Ratchet Plug Wrench 08-0147Designed to fit in limited space on many water-cooled 2-stroke engines, Ratchet mechanism works one way; turn over to reverse, Fits standard 13/16" plugs

MOTION PRO Oil Filter Wrench Honda 08-0015Designed to fit oil filter and clutch hub on many Honda models (single- and twin-cylinder machines)

MOTION PRO Puller Tool Right Hand M16x1.5 08-0027Heat-treated steel, See application chart below

MOTION PRO Puller Tool Left Hand External M27x1.0 08-0026Heat-treated steel, See application chart below

MOTION PRO Puller Tool Right Hand M20x1.5 08-0086Heat-treated steel, See application chart below

HOT CAMS Installation Kit CIK-001Contains degree wheel, standard unit indicator, adjustable magnetic stand, and three positive stops (10 mm, 12 mm and 14 mm threads), Can be used to install and adjust timing of any cam, Wooden carrying case

DENNIS STUBBLEFIELD SALES Right Hand Puller 28 mm x 1.25 MP-5Made in the U.S.A.

BIKESERVICE 3-Leg Oil Filter Wrench BS6656Works for filter diameter from 63 mm-95 mm (2-1/2" to 3-3/4"), use with 3/8" square drive ratchet, Allow easy removal of oil filters even in tight spaces, Vinyl dipped legs minimize filter damage

BIKESERVICE Stud Remover/Installer BS4328Eccentric rotation provides powerful grip for stubborn or rusted threads, or for setting new ones

BIKESERVICE Bearing Separator Kit BS4017Includes 2" and 3" bearing splitters with pulling capacity from 30 mm to 75 mm, bar-type puller head with 175 mm trust bolt, 2" bearing splitter 30-50 mm maximum reach up to 170 mm, 3" bearing splitter maximum...

BIKESERVICE Flywheel Puller Kit BS3913Kit includes 2 and 3 way yoke, 125 mm forcing screw, live tip, 3pc M6 x M1.0 x(L) 20 mm bolts, 3pc M6 x M1.0 x (L) 45 mm bolts, 3pc M8 x P1.25 x (L) 45 mm bolts, 3pc M8 x P1.25 x (L) 100 mm bolts, 3pc 3/8”x 16t UNC...