Dirt Bike Suspension Tools

Fork Cap Tool - Removal The tool is slotted to allow removal and replacement of caps with the P/N 11-0081 Micro Bleeders*, This tool allows removal and replacement of the accessory fork cap, Versatile design features a 22 mm hex and 3/8" square drive

Swingarm Bearing Tool Designed for installation of the swingarm bearings on late-model Japanese off-road motorcycles, Kit includes driver sizes I.D. 20 mm / O.D 26 mm, I.D. 21 mm / O.D. 26 mm and I.D. 22 mm / O.D. 27 mm, Includes three drivers for use...

Spanner Wrench - Fork Cap 4 pin spanner wrench is used to loosen the fork caps on KTM models with 48 mm WP forks, Slim design allows for fork cap removal without removing the handle bars, Comfort handle

Fork Cap Tool - Dual-Chamber - Closed Cartridge The 12.5 mm slot can hold the damper rod while removing the rebound bolt at the bottom of the fork, A must have tool to remove the fork cap (cartridge) on dual chamber closed cartridge forks, Works on Honda...

Fork Cap Tool - Dual-Chamber - Closed Cartridge The 12 mm slot can hold the damper rod while removing the rebound bolt at the bottom of the fork, Works on WP 4860 MXMA dual-chamber closed cartridge (WP USD 48 mm) on late model KTM's, A must-have tool to...

Fork Damping Rod Holder with Hex Adaptors Tool provides one rod with M10 x 1.0 end and 4 brass hex adaptors included: M10 x 1.0, M12 x 1.0, M12 x 1.25, and M14 x 1.0, Allows for effortless retrieval of the dampening rod after spring installation, Rod...

Shock Shaft Seal Tool - Set Tool set includes five sizes: 12.5 x 10 mm, 14 x 12 mm, 16 x 12 mm, 18 x 16 mm, and 18 x 12 mm, This tool set makes for quick and easy removal and installation of seal head assemblies, These tools protect the shock shaft seal...

Shock Seal Head Tool - Black - Set Helps to easily remove and install seal head assemblies, Knurled grip for accurate feel and movement, Universal

Shock Seal Head Tool - Black - 50 mm Helps to easily remove and install seal head assemblies on 50 mm WP shock, Knurled grip for accurate feel and movement, Made of high-quality tool steel

Shock Seal Head Tool - Black - 33-36 mm Helps to easily remove and install seal head assemblies on 33-36 mm shocks, Knurled grip for accurate feel and movement

Fork Compression Adjuster - Front - Showa For Showa forks.

WORKS CONNECTION Fork Air Loss Adapter 26-355Takes the guess work out of setting air fork or air shock pressure, PSI remains accurate to desired setting when disconnecting the adapter, Ensures the air pressure set is the air pressure you get; no air loss...

MOTION PRO Fork Wrench Tool 46 mm/ 50 mm 08-0656For removing the caps on Showa MX forks, Double ended wrench can be used for removal of the compression stack, Can be used for removal of a compression stack on late-model RMs

MOTION PRO Tool Shock Spring Compression 08-0608Safely removes the spring on most coilover shocks, Includes adapters for both clevis and eyelet type shocks, Clevis inside width is 35 mm, Eyelet width is 17 mm, Adapter plates adjust to fit spring...

MOTION PRO Tool Bearing Driver-Steer 08-0550Unique double-sided drivers, Fits all tapered steering bearings 41 mm to 56 mm, Installs the tapered bearing race in the frame, Ergonomic handle

MOTION PRO Tool Bearing Driver Wheel 08-0551Fits bearing with 12 mm - 25 mm inner diameter and 32 mm - 47 mm outer diameter, Adapters can be changed quickly to accommodate a wide range of bearing combinations, Can be used with a hammer or shop press,...

MOTION PRO Tool Fork Cap Socket KTM 08-0573Fits 2014 KTM XC models and all 2013-2014 Husaberg with WP 4860 4CS forks, For removing and installing left hand and right hand adjustable fork caps, Allows proper torque of the fork cap assemblies during...

MOTION PRO Tool Bearing Steer Stem 08-0544Removes and installs tapered roller bearing, Fits most motorcycles with tapered roller bearing at base of steering stem, Includes 26 mm, 28 mm, 30 mm - 31mm and 35 mm - 36 mm race protectors for installing...

MOTION PRO Tool Fork Cap Showa 50Mm 08-0569Outer ring fits 50 mm octagonal fork cap and can be clamped in vise to hold fork cap securely while cartridge is being removed, For removing the fork cap and compression cartridge on Showa SFF (Separate Function...

MOTION PRO Tool Fork Bolt- Showa® Separate Function front Fork 08-0603Removes the 22 mm lower sealing bolt from Showa Separate Function front Fork (SFF) Air Fork, Made in the U.S.A.