Dirt Bike Suspension Tools

RISK RACING Large Seal Doctor 45-55 mm 00121The design of the Seal Doctor maintains the proper position and angle while rotating around the fork tube so there's no need to remove most fork guards, To use the Seal Doctor, just lower the dust seal and snap...

RISK RACING Small Seal Doctor 35-45 mm 00123The design of the Seal Doctor maintains the proper position and angle while rotating around the fork tube so there's no need to remove most fork guards, To use the Seal Doctor, just lower the dust seal and snap...

RACE TECH Shock Seal Tool TSSS 02Allows the user to easily push shock seal heads into the bodies, For all 33 mm - 50 mm shocks with integral seal head assemblies

RACE TECH Tool KTM Shock Charge TSNC 02This tool is quick and easy to use and a "must have" for work on a higher volume of WP shocks, Works on all WP shocks that have a reservoir, Less expensive and easier to use than the factory recharging tool, Clamps...

RACE TECH Tool Fork Cap Wrench TFCW 50HUnique design works on multiple sizes of fork caps

Adapts shocks with self-sealing rubber valves for use with Race Tech nitrogen gauge

Eliminate the possibility of seal damage when installing the seal head onto the shaft, Make installing seal heads onto shock shafts quick and safe

Allows the user to easily push shock seal heads into the bodies, For all 33 mm - 50 mm shocks with integral seal head assemblies

RACE TECH Damping Rod Holding Tool TFDH 01Designed to make spinning damper rods easier to remove, With a tap of a hammer, the taper wedges into the ID of most Damping Rods, late model and vintage

RACE TECH Fork Cap Showa Tool TFCT3622One side is 35 mm to fit cartridge and the other is 19 mm for socket or box wrench, This is a dual-purpose tool for the Showa SFF Air TAC Fork, Allows you to remove the fork compression valve assembly from the top of...

RACE TECH Tool Shock Needle KTM TSPS T20PRO version of the needle removal tool for servicing a lot of WP PDS shocks, Driven with a T-handle, holds the Needle, and is self-centering in the body with a pin circle of 20.0 mm, Shaft features two locator...

RACE TECH Cylinder Graduated TFGC 500500cc graduated cylinder offers accurate fork oil measurement for twin chamber forks

RACE TECH Fork Holding Tool TFCH 04AHolds fork cartridges for disassembly and assembly

RACE TECH Fork Compression Tool TFCA 02Allows removal of the fork compression adjusters, Offers users a better way to turn the clickers and remove the compression adjuster during assembly

RACE TECH Tool Fork Tube TFTT 01For use when assembling and disassembling the fork tube from the axle lugs

RACE TECH Tool Rebound Piston Ring TFPC 2328Required for assembly of newer KTM forks, Compresses rebound piston ring to allow insertion into the cartridge tube

RACE TECH Fork Cap Wrench 48Mm TFCW 02Unique design works on multiple sizes of fork caps

RACE TECH Shock Quad Ring Tool TSPR 50Allows the removal of shock piston without damaging piston band, Fits in the circlip groove to allow the piston to slide past the groove without damage, Designed for Suzuki with Showa shocks

RACE TECH Tool, Pin WP PDS TSPS 1524Removes the Compression Needle from the shock body on early KTM WP PDS shocks, Required to install a SWCN 10 Telescopic Needle (15.0 pin spacing x 2.4mm pins)

RACE TECH Tool Pin Spanner 4-4.5Mm TMPS3843Designed to be used with shocks and forks that have holes for unscrewing, Unique "back cut" that keeps the pins from slipping out, Pins are replaceable