Mini Wedge Parts

Rod End LH 1/2 Male SteelRod EndStandardSpherical1/2 in Bore1/2-20 in Left Hand Male ThreadSteelZinc OxideEachGet your bars connected with these durable Allstar Performance steel rod ends. Made from high-quality carbon steel, these rod ends are built to...

Rod End RH 1/2 Male SteelRod EndStandardSpherical1/2 in Bore1/2-20 in Right Hand Male ThreadSteelZinc OxideEachGet your bars connected with these durable Allstar Performance steel rod ends. Made from high-quality carbon steel, these rod ends are built to...

Mini Wedge Steering Tie Rod 3/8 Includes tube, 2 heims, 2 jam nuts. 

Butterfly Steering Wheel Butterfly Steering Wheel (Black Only) universal bolt pattern

Air Filter for Mini Wedge 2-7/16 Flange Most common air filter used on 212 mini wedges. This filter is angled and has a 2-7/16" flange. Fabric. 4" inch tall.  Fabric 3.5" x 4" Angled  2-7/16" ID

PMI Straight Spindle 10 Degree 10 Degree KPI 1/2" ID Bearings Installed Straight 5/8" shaft....short, for LH oval use only 1.5" Tall Barrel Fits OEM Slack brand karts, but is a great universal spindle.

Aluminum Clevis Assembly 1/4-28 Thread Aluminum Clevis Assembly Includes Clevis Pin and Cotter Pin For Brake or Throttle Rods with 1/4-28 Thread Black Anodized Aluminum

Floor Mount Throttle Bracket Bolt In Floor Mount Throttle Bracket Clear Zinc Plated

1/4-28 Threaded Rod - 2 Foot straight threaded rod

Plastic Sprocket Guard 9" Plastic Sprocket Guard 9" OD

MaxTorque Stamped (11 Tooth) Clutch Gold Bushing Max-Torque Clone clutch, 11 Tooth

Pedal Grips 1/2 inch Pair 1/2" Aluminum Pedal Grips pair (Black)

Brake Pedal Uses 1/2" Pedal Grips

Throttle Pedal Uses 1/2" Pedal Grips

Snap Ring to hold the clutch driver to the clutch drum. Fits 12 tooth sprockets only. All other size sprockets, 13t and up, and 11t and below, have a specific snap ring to match sprocket and drum.

Axle snap ring (1 1/4")

High Quality MCP Brake Systems and Parts. The Industry Standard for Brake Components. Kit comes with hardware to mount rotor to hub. Hardware to attach caliper and master cylinder to frame is not included and must be ordered separately.

This push button quick release eliminates the possibility of losing the hub retaining pin due to the retained push button Quick release makes entry and exit of the vehicle a breeze with the steering wheel removed 5/8" ID weld on hex sleeve allows for...

1 1/4" Free Spin Axle Bearing Bearing is marked UC206-20K If OIL HOLE PLUG is present, it must be removed before installation.

Valve Stem (Short)