Pushrods and Parts

ANDREWS High-Lift Upper Spring Collars 271100Cams with .600 lift can easily be accommodated when used with high-lift springs, Made from T-6 aluminum, collars are lightweight, hard-coated and very strong, For 74" and 80" motors, Made in the U.S.A.

ANDREWS Low-Profile Lower Spring Collars XL 277160Similar to the late H-D collars, Will provide .060" more spring travel than stock collars, Made in the U.S.A.

FEULING OIL PUMP CORP. HP+® Pushrods Standard Twin Cam 4072Feuling highly recommends using one-piece pushrods instead of adjustable pushrods to maintain maximum cam/valve lift and reduce valvetrain harmonics and associated hydraulic lifter issues, Fixed...

FEULING OIL PUMP CORP. Adjustable Race Pushrods Twin Cam 4070Maintains maximum valve lift; increases stiffness and column rigidity, Maximizes valve-train stability to increase engine rpm, horsepower and torque output, Minimal adjustment parameter...

COLONY Pushrod Covers XL 2140-40Complete kit includes four adapter rings, four inner tubes, four bottom tubes, four clips, four spring covers, four springs, four spring washers and all seals, For use with adjustable pushrods, Made in the U.S.A.

COLONY Pushrod Kit Big Twin 9213-4These kits contain exact OEM duplicate parts for proper fitment, Upper cover kit contains chrome clips, chrome cups, springs, rubber seals and steel washers for four pushrod tubes, Lower cover kit contains four chrome...

COLONY Pushrod Kit Big Twin 9202-12These kits contain exact OEM duplicate parts for proper fitment, Upper cover kit contains chrome clips, chrome cups, springs, rubber seals and steel washers for four pushrod tubes, Lower cover kit contains four chrome...

COLONY Pushrod Kit Shovelhead/Evolution/Big Twin 7508-20These kits contain exact OEM duplicate parts for proper fitment, Upper cover kit contains chrome clips, chrome cups, springs, rubber seals and steel washers for four pushrod tubes, Lower cover kit...

COLONY PUSHROD TUBE KIT 99-17 TC DS193758This kit is a must when installing adjustable pushrods in a Twin Cam motor, Includes four short lower tubes and clips, which allow easy access to the adjuster nut and lock nut, Requires the use of OEM inner tubes,...

DRAG SPECIALTIES Pushrod Tube Kit Big Twin 75715Kits include upper and lower tubes, clips, cups, springs and washers (O-rings/corks sold separately), One kit will do a complete engine

DRAG SPECIALTIES Pushrod Tube Kit Big Twin 74951Kits include upper and lower tubes, clips, cups, springs and washers (O-rings/corks sold separately), One kit will do a complete engine

DRAG SPECIALTIES Pushrod Tube Assembly XL 72629Original-style replacement for XL models; includes everything needed, Each motor requires four tube assemblies.

DRAG SPECIALTIES Pushrod Tube Assembly Panhead 72703Original-style replacement for Panhead models; includes everything needed, Each motor requires four tube assemblies.

ARLEN NESS Pushrod Tube Kit Black 03-643Machined from 6061-T6 billet aluminum, Lower tubes allow easy access for adjustable pushrods, Each kit consists of lower tubes, spring cups, top clips and all necessary seals, Requires use of the OEM upper tubes,...

ARLEN NESS Pushrod Tubes Black 03-634Machined from 6061-T6 billet aluminum, Lower tubes allow easy access for adjustable pushrods, Each kit consists of lower tubes, spring cups, top clips and all necessary seals, Requires use of the OEM upper tubes,...

ANDREWS High-Lift Valve Springs 272110Provide correct spring force for any of our performance cams when used in 74" and 80" motors, Max lift; installation does not require complicated machining but does require proper valvetrain setup, Made in the U.S.A.

ANDREWS Medium-Lift Upper Spring Collar Set 276150Intended to work with stock springs and add approximately .060" spring travel with no other modifications on 66-84 74" and 80" motors, The easy way to install B or #2 cams in stock heads, Made in the U.S...

ANDREWS Valve Spring Collars 273120Similar to stock 80-style parts, but lower profile for easier installation of higher lift cams, Required parts if you use 80-style valve guides that utilize "K" line stem seals, Heat-treated steel, For 74" and 80"...

ANDREWS High-Lift Springs 294150Accommodates cam lifts of .550"+, Installation does not require machining of heads, Kit includes four inner and four outer springs, For use with titanium upper-spring collars, Collars sold separately, Made in the U.S.A.

ANDREWS Adjustable Pushrods M8 292017Andrews completely adjustable pushrods easily replace the nonadjustable stock pushrods on Evolution engines, Rocker boxes must be removed for installation, Made in the U.S.A.