Speakers

Outer fairing does not have to be removed to change grills, 1mm thick metal mesh grills come painted gloss black, Metal Mesh can be power coated, chromed, polished or painted, Grills are thick enough not to warp during finishing process, No corporate...

Required plate for mounting Hogtunes 4 channel amplifiers in 2015-Current Road Glide Fairings, Fits Hogtunes 4 Channel amps REV 450-REV and NCA 450-RM, Plate "snaps" amp easily right under radio inside the fairing, Stamped (painted black) steel parts...

1mm thick metal mesh that comes painted semi-gloss black, Metal mesh is thick enough to withstand painting, powder coating, polishing, etc., Replace the stock front speaker grill cloth for a much nicer look, Metal mesh is thick enough not to warp during...

Outer fairing does not have to be removed to change grills, 1mm thick metal mesh grills come painted gloss black, Metal Mesh can be power coated, chromed, polished or painted, Grills are thick enough not to warp during finishing process, No corporate...

1mm thick metal mesh that comes painted semi-gloss black, Metal mesh is thick enough to withstand painting, powder coating, polishing, etc., Replace the stock front speaker grill cloth for a much nicer look, Metal mesh is thick enough not to warp during...

1mm thick metal mesh that comes painted semi-gloss black, Metal mesh is thick enough to withstand painting, powder coating, polishing, etc., Replace the stock front speaker grill cloth for a much nicer look, Metal mesh is thick enough not to warp during...

Feature vented magnets for increased power handling, Includes metal mesh speaker grilles, 2 ohm, conservatively rated at 100 watts RMS power handling, Not compatible with CVO models with factory amplifiers installed.

Feature vented magnets for increased power handling, 2 ohm styles feature an all-new 1" titanium tweeter dome for smoother highs, New technologies give more bass response than previous models, Conservatively rated at 100 watts RMS power handling

Feature vented magnets for increased power handling, 2 ohm styles feature an all-new 1" titanium tweeter dome for smoother highs, New technologies give more bass response than previous models, Conservatively rated at 100 watts RMS power handling

Complete add-on tweeter kit, Doubles as a fairing accent piece with decorative chrome trim (included), Disassembles easily to paint-match custom-painted fairings, Black "see through" grilles can also be painted or chromed, Second set of cloth covered...

Dress up your inner fairing with these replacement speaker grilles, Mesh-cut aluminum grilles use stock hardware, Made in the U.S.A.

Dress up your inner fairing with these replacement speaker grilles, Mesh-cut aluminum grilles use stock hardware, Made in the U.S.A.

The Wild Boar Audio WBA ULTRA KIT is designed to transform the audio experience on your Harley-Davidson motorcycle, compatible with models from 2014 to 2024. This all-inclusive kit features dual amplifiers delivering 600 watts RMS, paired with...

ROKKER speakers are spec'd at 2 ohms impedance and 200 watts maximum input (130w RMS - 91db sensitivity), these speakers provide excellent on-highway performance, Speaker drivers feature lightweight waterproof woven-fiber cones with super-rigid metal...

Replacements for the stock 6.5" Harley rear trunk-pod speakers, Lightweight waterproof one-piece woven-fiber driver cone with super-rigid metal basket design, High-density lite-weight Neodymium magnet structure, specially coated to maintain flux-strength...

Speaker drivers feature lightweight waterproof woven-fiber cones with super-rigid metal basket and a high-density lite-weight Neodymium magnet structure with integral high-output PEI tweeters, Speaker grills, adapter rings and bracket hardware are...

Speaker drivers feature lightweight waterproof woven-fiber cones with super-rigid metal basket and a high-density lite-weight Neodymium magnet structure with integral high-output PEI tweeters, Speaker grills, adapter rings and bracket hardware are...

Speaker drivers feature lightweight waterproof woven-fiber cones with super-rigid metal basket and a high-density lite-weight Neodymium magnet structure with integral high-output PEI tweeters, Speaker grills, adapter rings and bracket hardware are...

Kit includes a full range class D audio amplifier, spec'd at 200watts RMS per channel X2, (400w total) into 2-ohm load @ 14.4vdc with dimensions of 7 ¼" X 4 ¾" X 1 ¾", Amplifier mounts to custom made stainless steel 2-piece bracket system, to provide...

Kit includes a full range class D audio amplifier, spec'd at 200watts RMS per channel X2, (400w total) into 2-ohm load @ 14.4vdc with dimensions of 7 ¼" X 4 ¾" X 1 ¾", Amplifier mounts to custom made stainless steel 2-piece bracket system, to provide...