Wiring Group

NAMZ Black Wire Cover 3/8" 25FT Universal NBFS-2503For various OEM or custom applications, Made in the U.S.A.

NAMZ Black Wire Cover 1/2" 25FT Universal NBFS-2504For various OEM or custom applications, Made in the U.S.A.

NAMZ Black Wire Cover 3/4" 25FT Universal NBFS-2505For various OEM or custom applications, Made in the U.S.A.

NAMZ Deutsch Hole Plugs DT DT-HPRefill your Deutsch Builder Kits with these connector components, Each connector features a silicon rubber seal to reduce corrosion and moisture, The same connectors, receptacles and plugs used on factory wiring harnesses,...

NAMZ Molex MX 150 Connector 16 Pin Male Gray NM-33482-1602Male and female connectors and terminals, Simple to use, Watertight construction in a small compact size, Hole plugs are used when a wire/terminal is not present in order to keep connector...

NAMZ Molex MX 150 Hole Plug NM-34345-0001Male and female connectors and terminals, Simple to use, Watertight construction in a small compact size, Hole plugs are used when a wire/terminal is not present in order to keep connector watertight, Made in the...

NAMZ Molex MX 150 U-Barrel Socket NM-33012-1002Male and female connectors and terminals, Simple to use, Watertight construction in a small compact size, Hole plugs are used when a wire/terminal is not present in order to keep connector watertight, Made...

NAMZ Molex MX 150 U-Barrel Pin NM-33000-1002Male and female connectors and terminals, Simple to use, Watertight construction in a small compact size, Hole plugs are used when a wire/terminal is not present in order to keep connector watertight, Made in...

NAMZ Throttle-By-Wire Externsion Harness Harley Davidson NTBW-4201Designed and tested to extend your wiring without causing any harm or interference to the motorcycle's computer when installing taller handlebars, Color coded to connect to the existing...

NAMZ Front Turn Signal Extension +4" NTSH-X04A must when installing taller handlebars, Intended for front turn signals mounted on handlebar switch housings, De-pin factory harness connector and install, No crimping necessary, Made in the U.S.A.

NAMZ Front Turn Signal Extension +8" NTSH-X08A must when installing taller handlebars, Intended for front turn signals mounted on handlebar switch housings, De-pin factory harness connector and install, No crimping necessary, Made in the U.S.A.

NAMZ Front Turn Signal Extension +12" NTSH-X12A must when installing taller handlebars, Intended for front turn signals mounted on handlebar switch housings, De-pin factory harness connector and install, No crimping necessary, Made in the U.S.A.

NAMZ Front Turn Signal Extension +15" NTSH-X15A must when installing taller handlebars, Intended for front turn signals mounted on handlebar switch housings, De-pin factory harness connector and install, No crimping necessary, Made in the U.S.A.

NAMZ Handlebar Switch Wire Extensions NHCX-UMNDesigned for those that would rather stagger-cut and solder in order to lengthen their wiring for taller bars, Wires are pre-stripped with the slug left in place to prevent fraying and the other end has...

NAMZ Handlebar Switch Wire Extensions NHCX-UMBDesigned for those that would rather stagger-cut and solder in order to lengthen their wiring for taller bars, Wires are pre-stripped with the slug left in place to prevent fraying and the other end has...

NAMZ Handlebar Switch Wire Extensions NHCX-UDBDesigned for those that would rather stagger-cut and solder in order to lengthen their wiring for taller bars, Wires are pre-stripped with the slug left in place to prevent fraying and the other end has...

NAMZ Shrink Tubing 3/32"ID 25FT NHSR-25332Used to cover cables and wiring, Protects paint and chrome, Made in the U.S.A.

NAMZ Shrink Tubing 1/8" ID 25FT NHSR-25018Used to cover cables and wiring, Protects paint and chrome, Made in the U.S.A.

NAMZ Shrink Tubing 3/38"ID 25FT NHSR-25038Used to cover cables and wiring, Protects paint and chrome, Made in the U.S.A.

NAMZ Shrink Tubing 1/2"ID 25FT NHSR-25012Used to cover cables and wiring, Protects paint and chrome, Made in the U.S.A.