How Much Fluid does a Racing Transmission Take?
Are you curious about how much fluid a racing transmission takes? If so, you're in the right place! It's important to be knowledgeable when it comes to your race car and keeping it maintained. But taking care of your race car isn't just limited to the obvious and necessary things like tires-you also need to keep an eye on fundamental components such as fluids for best performance. In this blog post, we'll take an in-depth look at how much fluid is needed by a racing transmission so that you can maintain it properly while on the circle track.
Winter's Falcon Transmission:
Recommended Fluid: Type F Fluid
Amount of Fluid: 1 Quart
Upgrade your car with the all-new Falcon 2-Speed Transmission Speeds. This transmission is IMCA Approved for the Stock Car, Modified, and Late Model classes. It features REM polished gears and an internal hydraulic clutch for enhanced performance. The 1-3/16"-27 spline output shaft accepts standard GM Muncie, Saginaw, or Powerglide slip yokes for easy compatibility. With a length of 21-5/8" and using the same drive shaft length as a Muncie, Saginaw, or Powerglide, it's a seamless fit for your race car. Upgrade now and experience the difference.
Bert LMZ/Gen1 Transmission:
Recommended Fluid: Bert Blue, or any ATF Fluid
Amount of Fluid: 14 OZ.
Bert LMZ, the ultimate 2-Speed Transmission for your stock car, modified, or late model! Experience improved performance with our internal clutch assembly, built to reduce rotating weight. Say goodbye to difficult shifting with our "dog teeth" gears. With a 1-3/16"-27 spline output shaft, this transmission is compatible with standard GM Muncie, Saginaw, and Powerglide slip yokes. Plus, it's designed to be 2-5/8" shorter than Muncie, saving you space without compromising on power.
Bert Gen 2 SG-1300, SG-1400, SG-1500 Transmission:
Recommended Fluid: Bert Blue, or any ATF Fluid
Amount of Fluid: 14 OZ.
Bert Gen 2 SG-1200 Transmission:
Recommended Fluid: Bert Blue, or any ATF Fluid
Amount of Fluid: 16 OZ.
Brinn Original Transmission:
Recommended Fluid: Brinn RT-1 Fluid
Amount of Fluid: Just over a quart
Brinn's 2-Speed Transmission Speeds: IMCA Approved for Stock Car, Modified, and Late Model classes. Say goodbye to clutch and throw-out bearing assemblies. Our gundrilled input and output shafts reduce weight. At just 6" long, this transmission features a 27 tooth output shaft spline that can accommodate any length yoke. Experience unbeatable durability and smooth shifting with our superior dog clutch design.
Recent Posts
-
Ball Joint Pin Length: Roll Center & Camber Gain Guide
Ball Joint Pin Length: Roll Center, Camber Gain & Geometry for Dirt Cars Quick Answer: Ball joint pi …Aug 17th 2026 -
How to Measure Upper Control Arms for Dirt Cars
How to Measure Upper Control Arm Lengths for Dirt Late Models, Modifieds & Street Stocks Getting the …Aug 8th 2026 -
Tight in the Middle? Here’s How to Free Up a Dirt Late Model Fast
Tight in the Middle? Here's How to Free Up a Dirt Late Model Fast Quick answer: A mid-corner push in …Aug 3rd 2026







