Harley Cams and Parts

EASTERN MOTORCYCLE PARTS Cam Bushing Kit XL 15-0153Made in the U.S.A.

EASTERN MOTORCYCLE PARTS Cam Shims XL A-6770A must when setting up new cams

EASTERN MOTORCYCLE PARTS Cam Shims XL A-6769A must when setting up new cams

EASTERN MOTORCYCLE PARTS Cam Shims XL A-6771A must when setting up new cams

EASTERN MOTORCYCLE PARTS Cam Gear Shims Big Twin A-25556-79Made in the U.S.A.

EASTERN MOTORCYCLE PARTS Cam Bushing Kit Big Twin 15-0131Big Twin kits include cam and gear shaft bushings/bearings, along with lock pins and thrust plate, Made in the U.S.A.

ANDREWS V2 Grind Cams Evolution XL 298120Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed, Stock base circle sizes allow the use of stock pushrods, V2 and N2 are bolt-in cams for stock applications designed for up to...

ANDREWS Cams R5 Grind XL 214110Biggest available four-cam set that does not require head work; however, some 82 engines may require spring spacing, Uses stock springs and provides great mid-range and upper-end power, Use with 9.0:1 to 10.0:1 compression...

ANDREWS Y Grind Cams XL 214080Biggest available four-cam set that does not require head work; however, some 82 engines may require spring spacing, Uses stock springs and provides great mid-range and upper-end power, Use with 9.0:1 to 10.0:1 compression...

ANDREWS Cams M460 M8 217460Bolt-in cam for stock compression 107" and 114" engines, For touring-style riding, Bolt-in cam for stock compression 107" and 114" engines, Also for 117" big bore kits with higher compression, Great low to mid RPM power...

ANDREWS Cams PB+ XL 214040Bolt-in four-cam set, More horsepower and torque, Stock springs OK to 7000 rpm, requires no headwork, Made in the U.S.A., Installer must check coil bind, valve-to-valve clearance, valve-to-piston clearance and cam lobe to case...

ANDREWS Cams PB+ XL 214050Bolt-in four-cam set, More horsepower and torque, Stock springs OK to 7000 rpm, requires no headwork, Made in the U.S.A., Installer must check coil bind, valve-to-valve clearance, valve-to-piston clearance and cam lobe to case...

ANDREWS Cams PB+ XL 214055Bolt-in four-cam set, More horsepower and torque, Stock springs OK to 7000 rpm, requires no headwork, Made in the U.S.A., Installer must check coil bind, valve-to-valve clearance, valve-to-piston clearance and cam lobe to case...

ANDREWS TW9 Grind Cams Twin Cam 216309Andrews Products grinds its cams with the help of a computer with cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and...

ANDREWS Cams 48 Series 2006 Dyna 2007-2017 Twin Cam 216348Broad tip cams for baggers with stock motors; max torque at low and mid rpm ranges, Use stock springs

ANDREWS Cams PB+ XL 214045Bolt-in four-cam set, More horsepower and torque, Stock springs OK to 7000 rpm, requires no headwork, Made in the U.S.A., Installer must check coil bind, valve-to-valve clearance, valve-to-piston clearance and cam lobe to case...

COMP CAMS V-Thunder Cam EVL-3010Provide the ultimate in arm-stretching power on the street or in competition, Power proven and backed by hundreds of exhaustive hours on V-Thunder's dyno and in on-bike testing, these cams provide added punch at all levels...

COMP CAMS V-Thunder Cam EVL-3030Provide the ultimate in arm-stretching power on the street or in competition, Power proven and backed by hundreds of exhaustive hours on V-Thunder's dyno and in on-bike testing, these cams provide added punch at all levels...

COMP CAMS Thumper Cams TC-4102Constructed from 8620 billet steel, A larger throttle body is a plus, "Endurance Ramp" lobe design makes great power but is easy on the tappets and valve train for long life, Made in the U.S.A.

COMP CAMS Thumper Cams TC-4104Constructed from 8620 billet steel, A larger throttle body is a plus, "Endurance Ramp" lobe design makes great power but is easy on the tappets and valve train for long life, Made in the U.S.A.