Cams and Parts

ANDREWS Cam Set Dyna Twin Cam 216367GCams work well with fuel injection or carburetor models, Run best with low restriction exhausts (1700-5200 rpm), Works well with carbs or fuel injection, Bolt-in cam for more torque with stock compression, Can be used...

ANDREWS Cam Set Twin Cam 288167GCams work well with fuel injection or carburetor models, Run best with low restriction exhausts (1700-5200 rpm), Works well with carbs or fuel injection, Bolt-in cam for more torque with stock compression, Can be used with...

ANDREWS Cam Set Dyna Twin Cam 216332Cams work well with fuel injection or carburetor models, Run best with low restriction exhausts (1700-5200 rpm), Works well with carbs or fuel injection, Bolt-in cam for more torque with stock compression, Can be used...

ANDREWS A2 Grind Cam 212267Cam bolts into 66-84 (except 80-81) Big Twin engines with no head work; on 80-81 engines the height of the stock H-D valve guides restricts spring travel (and cam lift) to .430" or less, Spring travel and clearance, plus...

ANDREWS Camshaft B2 Grind 212351More mid-range and high-end power for street/strip with smooth idle; best cam for 74/80 inchers and small strokers, Spring spacing required, and clearance at main bearing boss must be checked.

ANDREWS Camshaft B2 Grind 212353More mid-range and high-end power for street/strip with smooth idle; best cam for 74/80 inchers and small strokers, Spring spacing required, and clearance at main bearing boss must be checked.

ANDREWS Camshaft B2 Grind 212358More mid-range and high-end power for street/strip with smooth idle; best cam for 74/80 inchers and small strokers, Spring spacing required, and clearance at main bearing boss must be checked.

ANDREWS 7 Grind Camshaft 212536Great street cam, especially for 84/88-inch strokers with maximum torque from 2,200 to 6,500 rpm, Upgraded version of the original #6 grind

ANDREWS Cam Chain Drive Sprocket 288010Manufactured from 4340 steel, Cam drive sprockets replace the stock 34-tooth cam drive sprocket and include shims, Made in the U.S.A.

ANDREWS Chromoly Pushrods Twin Cam 292088EZ-install pushrods eliminate the need to disassemble your rocker boxes or remove the gas tank when changing cams or doing maintenance, Made in the U.S.A.

ANDREWS Cam Drive Sprocket 288020Can be used with OEM cam drive sprocket, Made in the U.S.A.

ANDREWS N2 Grind Cam XL 298130Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed, Stock base circle sizes allow the use of stock pushrods, Made in the U.S.A.

ANDREWS 7 Grind Camshaft 212539Great street cam, especially for 84/88-inch strokers with maximum torque from 2,200 to 6,500 rpm, Upgraded version of the original #6 grind

ANDREWS Cam Set Dyna Twin Cam 216354Cams work well with fuel injection or carburetor models, Run best with low restriction exhausts (1700-5200 rpm), Works well with carbs or fuel injection, Bolt-in cam for more torque with stock compression, Can be used...

ANDREWS Cam Set Dyna Twin Cam 216354GCams work well with fuel injection or carburetor models, Run best with low restriction exhausts (1700-5200 rpm), Works well with carbs or fuel injection, Bolt-in cam for more torque with stock compression, Can be used...

ANDREWS Cam Set Twin Cam 288154GCams work well with fuel injection or carburetor models, Run best with low restriction exhausts (1700-5200 rpm), Works well with carbs or fuel injection, Bolt-in cam for more torque with stock compression, Can be used with...

ANDREWS Cam Set Twin Cam 288154Cams work well with fuel injection or carburetor models, Run best with low restriction exhausts (1700-5200 rpm), Works well with carbs or fuel injection, Bolt-in cam for more torque with stock compression, Can be used with...

ANDREWS Cam Drive Gear Big Twin 212033High-quality heat-treated gears, Made in the U.S.A.

ANDREWS Cam Gears Black Big Twin 212044Made in the U.S.A., Measured of .105 gauge pins. Measuring the same gear with .108 pins will show a .012 larger measurement.

ANDREWS EV59 Cam Big Twin 291159These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float, Designed for modified 80" to 88" motors, Very broad powerband to 6000 rpm, For use with high lift springs and collars, Must...