Harley Cams and Parts

ANDREWS Cam TW48 1999-2006 Twin Cam 288148Broad tip cams for baggers with stock motors; max torque at low and mid rpm ranges, Use stock springs

ANDREWS TW57 Grind Cam Twin Cam 288157Bolt-in broad tip cams; 96" , 103" Limited and 110" CVO engines, Cams work best at rpm range of 2200-5600

ANDREWS Cam M520 M8 217520Made in the U.S.A.

ANDREWS Performance Cam 269122ANDREWS Performance Cam

FEULING OIL PUMP CORP. Race Series 508 Camshaft Kit 1459Include camshafts, lifters and a cam installation kit that, includes the cam bearing, cam/ crank hardware, Kit also includes gasket/O-ring kit that allows installation of Feuling Heavy-Duty HP+ ...

FEULING OIL PUMP CORP. 472 Cam Chain Drive Race Series Oil Cooled M8 7261Feuling® complete camchest kits include all necessary components from top to bottom of the camchest conveniently packaged under one part, These combination kits not only ensure each...

FEULING OIL PUMP CORP. Pressure Relief Kit M8 8007Increases pressure relief valve pop-off psi, Kit includes steel plunger valve, compression spring and roll pin, Spring alone provides proper spring rate to control pop-off pressure and oil flow in bypass...

FEULING OIL PUMP CORP. Cam 405 M8 1340Produces a wide powerband that increases torque and horsepower throughout the entire RPM range, Direct bolt-in replacement for M-Eight engines; can be used with stock valve springs, pushrods, lifters and exhaust,...

FEULING OIL PUMP CORP. Cam 465 M8 1343Produces solid bottom-end performance and substantial gains above 2800 RPM compared to the stock cams, Direct bolt-in replacement for M-Eight engines; can be used with stock valve springs, pushrods, lifters and...

FEULING OIL PUMP CORP. Camchest Kit HP+® Twin Cam 7220All necessary components from top-to-bottom of the camchest, Provide maximum reliability, longevity, peak performance, and the coolest engine and oil temperatures obtainable, Quieter and smoother...

FEULING OIL PUMP CORP. Camchest Kit HP+® Twin Cam 7221All necessary components from top-to-bottom of the camchest, Provide maximum reliability, longevity, peak performance, and the coolest engine and oil temperatures obtainable, Quieter and smoother...

ANDREWS N4 Grind Cam XL 298150Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed, Stock base circle sizes allow the use of stock pushrods, Made in the U.S.A.

ANDREWS N6 Cam XL 298170Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed, Stock base circle sizes allow the use of stock pushrods, Made in the U.S.A., N6 designed for modified 1200s to 80" and/or high-compression...

ANDREWS N8 Cam XL 298190Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed, Stock base circle sizes allow the use of stock pushrods, Made in the U.S.A.

ANDREWS EV23 Cam 291123These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float, Bolt-in cam for heavier touring bikes and high-geared bikes with 65-tooth rear pulleys, Uses stock springs; works with carbs or fuel...

ANDREWS V8 Cam XL 298180Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed, Stock base circle sizes allow the use of stock pushrods, Made in the U.S.A.

ANDREWS EV5 Grind Cam Big Twin 291150These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float, Made in the U.S.A.

ANDREWS EV7 Cam Big Twin 291170These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float, Excellent in the 2800-6500 rpm range, Designed for big-inch stroker motors with head work, Uses stock springs, Works with stock...

ANDREWS EV38 Grind Cam Big Twin 291138These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float, Made in the U.S.A.

ANDREWS EV51 Cam Big Twin 291151These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve float, Easy installation, Works with stock hydraulics, Long duration for modified street motors, Power range from 3000-6500 rpm, Must...