Harley Engine Tools

MOTION PRO Tool 25Mm Bearing Remover 08-0267Individual metric bearing remover

PINGEL Cylinder Head Holder 62082Mount in any bench vise in any position and hold cylinder head securely in place for all types of head work, Shaft of the tool has a drilled hole for clean and easy wall storage, Made in the U.S.A.

RIVCO PRODUCTS Wrench Oil Filter Harley-Davidson Card HD021Easily gets into tight spot to loosen filter without slipping, Features 14 flutes on filter wrench end; other end features 5/8" drain plug wrench (except mini wrench)

Locks ignition points to advanced position during tune-ups and distributor work, Made in the U.S.A.

Locks the crankshaft through the timing mark hole on the left, Enables timing and camshaft work to be done without the crankshaft moving from the timing mark line, Made in the U.S.A.

Slides over the left side of the splined crankshaft, Allows for easy rotation of the crankshaft during engine work, Made in the U.S.A.

ANDREWS .105" Gage Pins 212105Used to measure the outside diameter of cam drive gears, Made in the U.S.A., There are two basic differences between 90-99 cam gear sizes and earlier years. The overall range of gear pin measurements (from the largest gears...

ANDREWS .108" Gage Pins 212116Used to measure the outside diameter of cam drive gears, Made in the U.S.A., There are two basic differences between 90-99 cam gear sizes and earlier years. The overall range of gear pin measurements (from the largest gears...

FEULING OIL PUMP CORP. Valve Spring Seat Cutter '17+M8 9023Machine valve spring seats for proper installed spring height and spring cup fitment, Cutter bodies and pilots are interchangeable, Cuts spring seat 0.550" x 1.180"

FEULING OIL PUMP CORP. Pilot for Valve Spring Seat Cutter M8 9024For valve guides with 6 mm valves, Machine valve spring seats for proper installed spring height and spring cup fitment, Cutter bodies and pilots are interchangeable, Hardened pilots fit...

MOTION PRO Tool Spring Fork Compress 08-0144Assists in the disassembly and assembly of springer-type front forks on Harley-Davidson motorcycles, Made in the U.S.A.

MOTION PRO Tool Side Case Puller Harley-Davidson® 08-0153Used to remove the right side-case cover, Includes bracket, puller bolt and set screws, Made in the U.S.A.

JIMS Camshaft Seal Remover and Installer 2243 The JIMS Camshaft Seal Remover and Installer 2243 is an essential tool for any mechanic looking to efficiently install or remove cam seals without the hassle of removing the cam cover. Designed for ease of...

JIMS Bushing Bearing Puller 95760-57 The JIMS Bushing Bearing Puller 95760-57 is an essential tool for efficiently removing rocker bushings or bearings with minimal effort. Crafted in the U.S.A., this puller combines precision engineering with...

JIMS Oil Pump Snap Ring Installer 1052 The JIMS Oil Pump Snap Ring Installer 1052 is designed for effortless installation of outer snap rings on oil pump shafts. This precision tool ensures that the snap ring is applied without the risk of...

JIMS Oil Pump Seal Installer 1053 The JIMS Oil Pump Seal Installer 1053 is expertly designed to ensure a precise and leak-free installation of oil pump seals below the gear surface. This essential tool is compatible with all Big Twin aluminum oil pumps,...

The JIMS Big/Twin Tappet Aligning Tool 33443-84 is an essential tool for precise alignment of the oil hole from the crankcase to the tappet block, ensuring optimal performance in your Harley-Davidson® motorcycle. This versatile tool is also effective for...

JIMS XL Clutch Spring Tool 84-90 34761-84 Experience effortless clutch spring disassembly with the JIMS XL Clutch Spring Tool, designed specifically for 1984-1990 models. Crafted in the U.S.A., this tool ensures precision and durability, making it an...

JIMS Bearing Simulator 70-99 Big/Twin 1745 The JIMS Bearing Simulator 70-99 Big/Twin 1745 is an essential tool for motorcycle enthusiasts and mechanics, designed to simplify the process of flywheel assembly removal and replacement. This innovative...

The JIMS Crankshaft Guide 99-17 Twin Cam 1288 is an essential tool for any motorcycle enthusiast looking to ensure a flawless reassembly of the crankcase. Designed specifically for the Twin Cam models from 1999 to 2017, this guide simplifies the process...